Results for “what is stress in physics” · retrieved September 20, 2026

Quick answer

Stress is a physical quantity representing the internal force per unit area within a material that arises in response to externally applied forces.

In physics, stress is a measure of the internal forces that particles within a continuous material exert on each other, typically expressed as force per unit area. When an external force is applied to an object, it causes deformation, and the material generates an internal restoring force to resist this change. Stress quantifies this internal force relative to the cross-sectional area over which it acts. It is commonly represented by the Greek letter sigma (σ) and measured in pascals (Pa) or newtons per square meter (N/m²). Depending on the direction of the applied force, stress is categorized into types such as normal stress (perpendicular) and shear stress (tangential).

Answer details

1

Normal Stress

Normal stress occurs when forces act perpendicular to a surface, such as in tension (stretching) or compression (squeezing).

2

Shear Stress

Shear stress occurs when forces act tangentially or parallel to a surface, causing layers of the material to slide past one another.

3

Tensor Representation

While often calculated as a simple ratio, stress at a point is formally described by a stress tensor, which accounts for forces acting in different directions and orientations.

4

Units of Measurement

Stress is measured in pascals (Pa), where 1 Pa equals 1 newton per square meter (N/m²).

en.wikipedia.org

Stress (mechanics)

In continuum mechanics, stress is a physical quantity that describes forces present during deformation. For example, an object being pulled apart, such as a stretched elastic band, is subject to tensile stress and may undergo elongation. An object being pushed together, such as a crumpled sponge, is subject to compressive stress and may undergo shortening. [1] [2] The greater the force and the smaller the cross-sectional area of the body on which

Publication date not supplied

britannica.com

Stress | Physics, Types & Effects

stress, in physical sciences and engineering, force per unit area within materials that arises from externally applied forces, uneven heating, or permanent deformation and that permits an accurate description and prediction of elastic, plastic, and fluid behaviour. A stress is expressed as a quotient of a force divided by an area....There are many kinds of stress. Normal stress arises from forces that are perpendicular to a cross-sectional area o

September 5, 2026

openstax.org

12.3 Stress, Strain, and Elastic Modulus - University Physics Volume 1 | OpenStax

For the remainder of this chapter, we move from consideration of forces that affect the motion of an object to those that affect an object’s shape. A change in shape due to the application of a force is known as a deformation. Even very small forces are known to cause some deformation. Deformation is experienced by objects or physical media under the action of external forces—for example, this may be squashing, squeezing, ripping, twisting, shear

September 19, 2016

phys.libretexts.org

12.4: Stress, Strain, and Elastic Modulus (Part 1)

For the remainder of this section, we move from consideration of forces that affect the motion of an object to those that affect an object’s shape. A change in shape due to the application of a force is known as a deformation. Even very small forces are known to cause some deformation. Deformation is experienced by objects or physical media under the action of external forces—for example, this may be squashing, squeezing, ripping, twisting, shear

October 18, 2016

nde-ed.org

Stress and Strain - Nondestructive Evaluation Physics

Request RejectedThe requested URL was rejected. Please consult with your administrator.Your support ID is: 11858389803142775885[[Go Back]](javascript:history.back();)

Publication date not supplied

bu.edu

Mechanics of Materials: Stress

Welcome to the Mechanics of Materials. This course builds directly on the fundamentals we learned in Statics – calculating the static equilibrium of various structures under various loads. In statics, we consider the external forces acting on rigid bodies. In reality, all bodies are deformable and those external forces generate internal stresses. Well then, what's a stress? Stress is the measure of an external force acting over the cross section

Publication date not supplied

ocw.mit.edu

Stress

Now we consider a more general situation, namely an arbitrarily shaped solid which may be subjected to all sorts of externally applied loads - distributed or concentrated forces and moments. We are going to lift our gaze up from the world of crude structural elements such as truss bars in tension, shafts in torsion, or beams in bending to view these “solids” from a more abstract perspective. They all become special cases of a more general stuff w

Publication date not supplied

byjus.com

Stress Units

In physics, stress is the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body. How much force material experience can be measured using stress units. Stress can be categorized into three categories depending upon the direction of the deforming forces acting on the body. Let us study them one by one....What Is Stress?...When the deforming force is applied to an object, the o

March 25, 2019

Keep exploring

Related on this site

This page was prepared by Seeked from live retrieval on September 20, 2026 and is not continuously updated. Run a fresh search for the latest, or to inspect each source.